more work on alternate board pinouts

diff --git a/Sensor Watch Starter Project/app.c b/Sensor Watch Starter Project/app.c
index 3fa3a6185285a19825e2c59e484ae1dcfb1b0976..82ee26d5a52750743729f713dd9c81343d440346 100644 (file)
--- a/Sensor Watch Starter Project/app.c
+++ b/Sensor Watch Starter Project/app.c
@@ -76,7 +76,7 @@ void app_wake_from_deep_sleep() {
  * still be configured with the correct date and time.
  */
 void app_setup() {
-    watch_enable_led(false); // enable LED with plain digital IO, not PWM
+    watch_enable_leds();
 
     watch_enable_external_interrupts();
     // This starter app demonstrates three different ways of using the button interrupts.

diff --git a/boards/OSO-SWAT-A1-04/pins.h b/boards/OSO-SWAT-A1-04/pins.h
index 3be122bdf84f6a4d4deb2f67b3532fc1bdd19b76..89e1f5862c3ae470886344b6a9f1d66ab19c1248 100644 (file)
--- a/boards/OSO-SWAT-A1-04/pins.h
+++ b/boards/OSO-SWAT-A1-04/pins.h
@@ -6,10 +6,11 @@
 
 // Buttons
 #define BTN_ALARM GPIO(GPIO_PORTA, 2)
+#define WATCH_BTN_ALARM_EIC_CHANNEL 2
 #define BTN_LIGHT GPIO(GPIO_PORTA, 22)
-#define WATCH_BTN_LIGHT_EIC_PINMUX PINMUX_PA22A_EIC_EXTINT6
+#define WATCH_BTN_LIGHT_EIC_CHANNEL 6
 #define BTN_MODE GPIO(GPIO_PORTA, 23)
-#define WATCH_BTN_MODE_EIC_PINMUX PINMUX_PA23A_EIC_EXTINT7
+#define WATCH_BTN_MODE_EIC_CHANNEL 7
 
 // Buzzer
 #define BUZZER GPIO(GPIO_PORTA, 27)
@@ -34,40 +35,45 @@
 #endif
 
 // Segment LCD
-#define COM0 GPIO(GPIO_PORTB, 6)
-#define COM1 GPIO(GPIO_PORTB, 7)
-#define COM2 GPIO(GPIO_PORTB, 8)
-#define SEG0 GPIO(GPIO_PORTB, 9)
-#define SEG1 GPIO(GPIO_PORTA, 4)
-#define SEG2 GPIO(GPIO_PORTA, 5)
-#define SEG3 GPIO(GPIO_PORTA, 6)
-#define SEG4 GPIO(GPIO_PORTA, 7)
-#define SEG5 GPIO(GPIO_PORTA, 8)
-#define SEG6 GPIO(GPIO_PORTA, 9)
-#define SEG7 GPIO(GPIO_PORTA, 10)
-#define SEG8 GPIO(GPIO_PORTA, 11)
-#define SEG9 GPIO(GPIO_PORTB, 11)
-#define SEG10 GPIO(GPIO_PORTB, 12)
-#define SEG11 GPIO(GPIO_PORTB, 13)
-#define SEG12 GPIO(GPIO_PORTB, 14)
-#define SEG13 GPIO(GPIO_PORTB, 15)
-#define SEG14 GPIO(GPIO_PORTA, 12)
-#define SEG15 GPIO(GPIO_PORTA, 13)
-#define SEG16 GPIO(GPIO_PORTA, 14)
-#define SEG17 GPIO(GPIO_PORTA, 15)
-#define SEG18 GPIO(GPIO_PORTA, 16)
-#define SEG19 GPIO(GPIO_PORTA, 17)
-#define SEG20 GPIO(GPIO_PORTA, 18)
-#define SEG21 GPIO(GPIO_PORTA, 19)
-#define SEG22 GPIO(GPIO_PORTB, 16)
-#define SEG23 GPIO(GPIO_PORTB, 17)
+#define SLCD0 GPIO(GPIO_PORTB, 6)
+#define SLCD1 GPIO(GPIO_PORTB, 7)
+#define SLCD2 GPIO(GPIO_PORTB, 8)
+#define SLCD3 GPIO(GPIO_PORTB, 9)
+#define SLCD4 GPIO(GPIO_PORTA, 4)
+#define SLCD5 GPIO(GPIO_PORTA, 5)
+#define SLCD6 GPIO(GPIO_PORTA, 6)
+#define SLCD7 GPIO(GPIO_PORTA, 7)
+#define SLCD8 GPIO(GPIO_PORTA, 8)
+#define SLCD9 GPIO(GPIO_PORTA, 9)
+#define SLCD10 GPIO(GPIO_PORTA, 10)
+#define SLCD11 GPIO(GPIO_PORTA, 11)
+#define SLCD12 GPIO(GPIO_PORTB, 11)
+#define SLCD13 GPIO(GPIO_PORTB, 12)
+#define SLCD14 GPIO(GPIO_PORTB, 13)
+#define SLCD15 GPIO(GPIO_PORTB, 14)
+#define SLCD16 GPIO(GPIO_PORTB, 15)
+#define SLCD17 GPIO(GPIO_PORTA, 12)
+#define SLCD18 GPIO(GPIO_PORTA, 13)
+#define SLCD19 GPIO(GPIO_PORTA, 14)
+#define SLCD20 GPIO(GPIO_PORTA, 15)
+#define SLCD21 GPIO(GPIO_PORTA, 16)
+#define SLCD22 GPIO(GPIO_PORTA, 17)
+#define SLCD23 GPIO(GPIO_PORTA, 18)
+#define SLCD24 GPIO(GPIO_PORTA, 19)
+#define SLCD25 GPIO(GPIO_PORTB, 16)
+#define SLCD26 GPIO(GPIO_PORTB, 17)
 
 // 9-pin connector
 #define A0 GPIO(GPIO_PORTB, 4)
+#define WATCH_A0_EIC_CHANNEL 4
 #define A1 GPIO(GPIO_PORTB, 1)
+#define WATCH_A1_EIC_CHANNEL 1
 #define A2 GPIO(GPIO_PORTB, 2)
+#define WATCH_A2_EIC_CHANNEL 2
 #define A3 GPIO(GPIO_PORTB, 3)
+#define WATCH_A3_EIC_CHANNEL 3
 #define A4 GPIO(GPIO_PORTB, 0)
+#define WATCH_A4_EIC_CHANNEL 0
 #define SDA GPIO(GPIO_PORTB, 30)
 #define SCL GPIO(GPIO_PORTB, 31)
 

diff --git a/watch-library/hw/driver_init.c b/watch-library/hw/driver_init.c
index 273852cfad3f324913f22b4a4a01576009bf03f7..2cfdced7fe29a68284f7f780339e968a16d428f3 100644 (file)
--- a/watch-library/hw/driver_init.c
+++ b/watch-library/hw/driver_init.c
@@ -66,33 +66,33 @@ void delay_driver_init(void) {
 }
 
 void SEGMENT_LCD_0_PORT_init(void) {
-       gpio_set_pin_function(COM0, PINMUX_PB06B_SLCD_LP0);
-       gpio_set_pin_function(COM1, PINMUX_PB07B_SLCD_LP1);
-       gpio_set_pin_function(COM2, PINMUX_PB08B_SLCD_LP2);
-       gpio_set_pin_function(SEG0, PINMUX_PB09B_SLCD_LP3);
-       gpio_set_pin_function(SEG1, PINMUX_PA04B_SLCD_LP4);
-       gpio_set_pin_function(SEG2, PINMUX_PA05B_SLCD_LP5);
-       gpio_set_pin_function(SEG3, PINMUX_PA06B_SLCD_LP6);
-       gpio_set_pin_function(SEG4, PINMUX_PA07B_SLCD_LP7);
-       gpio_set_pin_function(SEG5, PINMUX_PA08B_SLCD_LP11);
-       gpio_set_pin_function(SEG6, PINMUX_PA09B_SLCD_LP12);
-       gpio_set_pin_function(SEG7, PINMUX_PA10B_SLCD_LP13);
-       gpio_set_pin_function(SEG8, PINMUX_PA11B_SLCD_LP14);
-       gpio_set_pin_function(SEG9, PINMUX_PB11B_SLCD_LP21);
-       gpio_set_pin_function(SEG10, PINMUX_PB12B_SLCD_LP22);
-       gpio_set_pin_function(SEG11, PINMUX_PB13B_SLCD_LP23);
-       gpio_set_pin_function(SEG12, PINMUX_PB14B_SLCD_LP24);
-       gpio_set_pin_function(SEG13, PINMUX_PB15B_SLCD_LP25);
-       gpio_set_pin_function(SEG14, PINMUX_PA12B_SLCD_LP28);
-       gpio_set_pin_function(SEG15, PINMUX_PA13B_SLCD_LP29);
-       gpio_set_pin_function(SEG16, PINMUX_PA14B_SLCD_LP30);
-       gpio_set_pin_function(SEG17, PINMUX_PA15B_SLCD_LP31);
-       gpio_set_pin_function(SEG18, PINMUX_PA16B_SLCD_LP32);
-       gpio_set_pin_function(SEG19, PINMUX_PA17B_SLCD_LP33);
-       gpio_set_pin_function(SEG20, PINMUX_PA18B_SLCD_LP34);
-       gpio_set_pin_function(SEG21, PINMUX_PA19B_SLCD_LP35);
-       gpio_set_pin_function(SEG22, PINMUX_PB16B_SLCD_LP42);
-       gpio_set_pin_function(SEG23, PINMUX_PB17B_SLCD_LP43);
+       gpio_set_pin_function(SLCD0, GPIO_PIN_FUNCTION_B);
+       gpio_set_pin_function(SLCD1, GPIO_PIN_FUNCTION_B);
+       gpio_set_pin_function(SLCD2, GPIO_PIN_FUNCTION_B);
+       gpio_set_pin_function(SLCD3, GPIO_PIN_FUNCTION_B);
+       gpio_set_pin_function(SLCD4, GPIO_PIN_FUNCTION_B);
+       gpio_set_pin_function(SLCD5, GPIO_PIN_FUNCTION_B);
+       gpio_set_pin_function(SLCD6, GPIO_PIN_FUNCTION_B);
+       gpio_set_pin_function(SLCD7, GPIO_PIN_FUNCTION_B);
+       gpio_set_pin_function(SLCD8, GPIO_PIN_FUNCTION_B);
+       gpio_set_pin_function(SLCD9, GPIO_PIN_FUNCTION_B);
+       gpio_set_pin_function(SLCD10, GPIO_PIN_FUNCTION_B);
+       gpio_set_pin_function(SLCD11, GPIO_PIN_FUNCTION_B);
+       gpio_set_pin_function(SLCD12, GPIO_PIN_FUNCTION_B);
+       gpio_set_pin_function(SLCD13, GPIO_PIN_FUNCTION_B);
+       gpio_set_pin_function(SLCD14, GPIO_PIN_FUNCTION_B);
+       gpio_set_pin_function(SLCD15, GPIO_PIN_FUNCTION_B);
+       gpio_set_pin_function(SLCD16, GPIO_PIN_FUNCTION_B);
+       gpio_set_pin_function(SLCD17, GPIO_PIN_FUNCTION_B);
+       gpio_set_pin_function(SLCD18, GPIO_PIN_FUNCTION_B);
+       gpio_set_pin_function(SLCD19, GPIO_PIN_FUNCTION_B);
+       gpio_set_pin_function(SLCD20, GPIO_PIN_FUNCTION_B);
+       gpio_set_pin_function(SLCD21, GPIO_PIN_FUNCTION_B);
+       gpio_set_pin_function(SLCD22, GPIO_PIN_FUNCTION_B);
+       gpio_set_pin_function(SLCD23, GPIO_PIN_FUNCTION_B);
+       gpio_set_pin_function(SLCD24, GPIO_PIN_FUNCTION_B);
+       gpio_set_pin_function(SLCD25, GPIO_PIN_FUNCTION_B);
+       gpio_set_pin_function(SLCD26, GPIO_PIN_FUNCTION_B);
 }
 
 /**

diff --git a/watch-library/hw/driver_init.h b/watch-library/hw/driver_init.h
index 6780e20d6f15a6d1a5a549ce6291ae429f0a94c2..019a0b568a283e0defd37716ccbe068bdf2bac71 100644 (file)
--- a/watch-library/hw/driver_init.h
+++ b/watch-library/hw/driver_init.h
@@ -8,6 +8,16 @@
 #ifndef DRIVER_INIT_INCLUDED
 #define DRIVER_INIT_INCLUDED
 
+#define GPIO_PIN_FUNCTION_A 0
+#define GPIO_PIN_FUNCTION_B 1
+#define GPIO_PIN_FUNCTION_C 2
+#define GPIO_PIN_FUNCTION_D 3
+#define GPIO_PIN_FUNCTION_E 4
+#define GPIO_PIN_FUNCTION_F 5
+#define GPIO_PIN_FUNCTION_G 6
+#define GPIO_PIN_FUNCTION_H 7
+#define GPIO_PIN_FUNCTION_I 8
+
 #include "pins.h"
 
 #ifdef __cplusplus

diff --git a/watch-library/watch/watch_extint.c b/watch-library/watch/watch_extint.c
index 1199dd3557d0e915c1b7da9c946b840a81a5c601..f2bad949af38d98d50cb32b1fa05e7c1485109ef 100644 (file)
--- a/watch-library/watch/watch_extint.c
+++ b/watch-library/watch/watch_extint.c
@@ -37,62 +37,53 @@ void watch_disable_external_interrupts() {
 }
 
 void watch_register_interrupt_callback(const uint8_t pin, ext_irq_cb_t callback, watch_interrupt_trigger trigger) {
-    uint32_t pinmux;
-    hri_eic_config_reg_t config = hri_eic_get_CONFIG_reg(EIC, 0, 0xFFFFFFFF);
-
+    uint8_t config_index;
+    uint8_t sense_pos;
     switch (pin) {
-        case A4:
-            // same steps for each: determine the correct pin mux...
-            pinmux = PINMUX_PB00A_EIC_EXTINT0;
-            // ...clear out the configuration for this EIC channel...
-            config &= ~EIC_CONFIG_SENSE0_Msk;
-            // ...and reconfigure it with our new trigger value.
-            config |= EIC_CONFIG_SENSE0(trigger);
+        case A0:
+            // for EIC channels 8-15, we need to set the SENSE value in CONFIG[1]
+            config_index = (WATCH_A0_EIC_CHANNEL > 7) ? 1 : 0;
+            // either way the index in CONFIG[n] must be 0-7
+            sense_pos = 4 * (WATCH_A0_EIC_CHANNEL % 8);
             break;
         case A1:
-            pinmux = PINMUX_PB01A_EIC_EXTINT1;
-            config &= ~EIC_CONFIG_SENSE1_Msk;
-            config |= EIC_CONFIG_SENSE1(trigger);
-            break;
-        case BTN_ALARM:
-            gpio_set_pin_pull_mode(pin, GPIO_PULL_DOWN);
-            pinmux = PINMUX_PA02A_EIC_EXTINT2;
-            config &= ~EIC_CONFIG_SENSE2_Msk;
-            config |= EIC_CONFIG_SENSE2(trigger);
+            config_index = (WATCH_A1_EIC_CHANNEL > 7) ? 1 : 0;
+            sense_pos = 4 * (WATCH_A1_EIC_CHANNEL % 8);
             break;
         case A2:
-            pinmux = PINMUX_PB02A_EIC_EXTINT2;
-            config &= ~EIC_CONFIG_SENSE2_Msk;
-            config |= EIC_CONFIG_SENSE2(trigger);
+            config_index = (WATCH_A2_EIC_CHANNEL > 7) ? 1 : 0;
+            sense_pos = 4 * (WATCH_A2_EIC_CHANNEL % 8);
             break;
         case A3:
-            pinmux = PINMUX_PB03A_EIC_EXTINT3;
-            config &= ~EIC_CONFIG_SENSE3_Msk;
-            config |= EIC_CONFIG_SENSE3(trigger);
+            config_index = (WATCH_A3_EIC_CHANNEL > 7) ? 1 : 0;
+            sense_pos = 4 * (WATCH_A3_EIC_CHANNEL % 8);
             break;
-        case A0:
-            pinmux = PINMUX_PB04A_EIC_EXTINT4;
-            config &= ~EIC_CONFIG_SENSE4_Msk;
-            config |= EIC_CONFIG_SENSE4(trigger);
+        case A4:
+            config_index = (WATCH_A4_EIC_CHANNEL > 7) ? 1 : 0;
+            sense_pos = 4 * (WATCH_A4_EIC_CHANNEL % 8);
+            break;
+        case BTN_ALARM:
+            // for the buttons, we need an internal pull-down.
+            gpio_set_pin_pull_mode(pin, GPIO_PULL_DOWN);
+            config_index = (WATCH_BTN_ALARM_EIC_CHANNEL > 7) ? 1 : 0;
+            sense_pos = 4 * (WATCH_BTN_ALARM_EIC_CHANNEL % 8);
             break;
         case BTN_LIGHT:
             gpio_set_pin_pull_mode(pin, GPIO_PULL_DOWN);
-            pinmux = WATCH_BTN_LIGHT_EIC_PINMUX;
-            config &= ~EIC_CONFIG_SENSE6_Msk;
-            config |= EIC_CONFIG_SENSE6(trigger);
+            config_index = (WATCH_BTN_LIGHT_EIC_CHANNEL > 7) ? 1 : 0;
+            sense_pos = 4 * (WATCH_BTN_LIGHT_EIC_CHANNEL % 8);
             break;
         case BTN_MODE:
             gpio_set_pin_pull_mode(pin, GPIO_PULL_DOWN);
-            pinmux = WATCH_BTN_MODE_EIC_PINMUX;
-            config &= ~EIC_CONFIG_SENSE7_Msk;
-            config |= EIC_CONFIG_SENSE7(trigger);
+            config_index = (WATCH_BTN_MODE_EIC_CHANNEL > 7) ? 1 : 0;
+            sense_pos = 4 * (WATCH_BTN_MODE_EIC_CHANNEL % 8);
             break;
         default:
             return;
     }
 
     gpio_set_pin_direction(pin, GPIO_DIRECTION_IN);
-    gpio_set_pin_function(pin, pinmux);
+    gpio_set_pin_function(pin, GPIO_PIN_FUNCTION_A);
 
     // EIC configuration register is enable-protected, so we have to disable it first...
     if (hri_eic_get_CTRLA_reg(EIC, EIC_CTRLA_ENABLE)) {
@@ -101,9 +92,12 @@ void watch_register_interrupt_callback(const uint8_t pin, ext_irq_cb_t callback,
         hri_eic_wait_for_sync(EIC, EIC_SYNCBUSY_ENABLE);
     }
     // now update the configuration...
-       hri_eic_write_CONFIG_reg(EIC, 0, config);
+    hri_eic_config_reg_t config = EIC->CONFIG[config_index].reg;
+    config &= ~(7 << sense_pos);
+    config |= trigger << (sense_pos);
+    hri_eic_write_CONFIG_reg(EIC, config_index, config);
     // ...and re-enable the EIC
-       hri_eic_set_CTRLA_ENABLE_bit(EIC);
+    hri_eic_set_CTRLA_ENABLE_bit(EIC);
 
     ext_irq_register(pin, callback);
 }

diff --git a/watch-library/watch/watch_extint.h b/watch-library/watch/watch_extint.h
index e3084371cd18a0bef2c4e4ea08de8bacb70717e4..9c810534280b791d0f0391893a1da45c10866e0d 100644 (file)
--- a/watch-library/watch/watch_extint.h
+++ b/watch-library/watch/watch_extint.h
@@ -59,16 +59,15 @@ void watch_disable_external_interrupts();
   *          want to detect both rising and falling conditions (i.e. button down and button up), use
   *          INTERRUPT_TRIGGER_BOTH and use watch_get_pin_level to check the pin level in your callback
   *          to determine which condition caused the interrupt.
-  * @param pin One of pins BTN_LIGHT, BTN_MODE, BTN_ALARM, or A0-A5. If the pin parameter matches one of
+  * @param pin One of pins BTN_LIGHT, BTN_MODE, BTN_ALARM, or A0-A4. If the pin parameter matches one of
   *            the three button pins, this function will also enable an internal pull-down resistor. If
-  *            the pin parameter is A0-A5, you are responsible for setting any required pull configuration
+  *            the pin parameter is A0-A4, you are responsible for setting any required pull configuration
   *            using watch_enable_pull_up or watch_enable_pull_down.
   * @param callback The function you wish to have called when the button is pressed.
   * @param trigger The condition on which you wish to trigger: rising, falling or both.
   * @note The alarm button and pin A2 share an external interrupt channel EXTINT[2]; you can only use one
   *       or the other. However! These pins both have an alternate method of triggering via the RTC tamper
-  *       interrupt, which for A2 at least has the added benefit of being able to trigger in the low-power
-  *       BACKUP mode.
+  *       interrupt, which has the added benefit of not requiring the external interrupt controller at all.
   * @see watch_register_extwake_callback
   */
 void watch_register_interrupt_callback(const uint8_t pin, ext_irq_cb_t callback, watch_interrupt_trigger trigger);