move app.h to library, no need for user to change it

diff --git a/Sensor Watch Starter Project/app.h b/Sensor Watch Starter Project/app.h
deleted file mode 100644 (file)
index df40a30..0000000
--- a/Sensor Watch Starter Project/app.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/**
-  * Header file for Sensor Watch application
-  *
-  * You should be able to write a watch app by simply implementing these functions
-  * and declaring callbacks for various GPIO and peripheral interrupts. The main.c
-  * file takes care of calling these functions for you. The general flow:
-  *
-  * 1. Your app_init() function is called.
-  *      - This method should only be used to set your initial application state.
-  * 2. If your app is waking from BACKUP, app_wake_from_deep_sleep()  is called.
-  *      - If you saved state in the RTC's backup registers, you can restore it here.
-  * 3. Your app_setup() method is called.
-  *      - You may wish to enable some functionality and peripherals here.
-  *      - You should definitely set up some interrupts here.
-  * 4. The main run loop begins: your app_loop() function is called.
-  *      - Run code and update your UI here.
-  *      - Return true if your app is prepared to enter STANDBY mode.
-  * 5. This step differs depending on the value returned by app_loop:
-  *      - If you returned false, execution resumes at (4).
-  *      - If you returned true, app_prepare_for_sleep() is called; execution moves on to (6).
-  * 6. The microcontroller enters the STANDBY sleep mode.
-  *      - No user code will run, and the watch will enter a low power mode.
-  *      - The watch will remain in this state until an interrupt wakes it.
-  * 7. Once woken from STANDBY, your app_wake_from_sleep() function is called.
-  *      - After this, execution resumes at (4).
-  */
-
-void app_init();
-void app_wake_from_deep_sleep();
-void app_setup();
-bool app_loop();
-void app_prepare_for_sleep();
-void app_wake_from_sleep();

diff --git a/watch-library/app.h b/watch-library/app.h
new file mode 100644 (file)
index 0000000..df40a30
--- /dev/null
+++ b/watch-library/app.h
@@ -0,0 +1,33 @@
+/**
+  * Header file for Sensor Watch application
+  *
+  * You should be able to write a watch app by simply implementing these functions
+  * and declaring callbacks for various GPIO and peripheral interrupts. The main.c
+  * file takes care of calling these functions for you. The general flow:
+  *
+  * 1. Your app_init() function is called.
+  *      - This method should only be used to set your initial application state.
+  * 2. If your app is waking from BACKUP, app_wake_from_deep_sleep()  is called.
+  *      - If you saved state in the RTC's backup registers, you can restore it here.
+  * 3. Your app_setup() method is called.
+  *      - You may wish to enable some functionality and peripherals here.
+  *      - You should definitely set up some interrupts here.
+  * 4. The main run loop begins: your app_loop() function is called.
+  *      - Run code and update your UI here.
+  *      - Return true if your app is prepared to enter STANDBY mode.
+  * 5. This step differs depending on the value returned by app_loop:
+  *      - If you returned false, execution resumes at (4).
+  *      - If you returned true, app_prepare_for_sleep() is called; execution moves on to (6).
+  * 6. The microcontroller enters the STANDBY sleep mode.
+  *      - No user code will run, and the watch will enter a low power mode.
+  *      - The watch will remain in this state until an interrupt wakes it.
+  * 7. Once woken from STANDBY, your app_wake_from_sleep() function is called.
+  *      - After this, execution resumes at (4).
+  */
+
+void app_init();
+void app_wake_from_deep_sleep();
+void app_setup();
+bool app_loop();
+void app_prepare_for_sleep();
+void app_wake_from_sleep();