From: Joey Castillo <joeycastillo@utexas.edu>
Date: Wed, 28 May 2025 00:39:56 +0000 (-0400)
Subject: set LED's drive strength to high
X-Git-Url: https://git.earman.xyz/?a=commitdiff_plain;h=7cf81ee9e015c4307476e49ddc1cced6403fff6a;p=sensor-watch.git

set LED's drive strength to high
---

diff --git a/watch-library/hardware/watch/watch_tcc.c b/watch-library/hardware/watch/watch_tcc.c
index 8e96bba..b5d50f9 100644
--- a/watch-library/hardware/watch/watch_tcc.c
+++ b/watch-library/hardware/watch/watch_tcc.c
@@ -222,13 +222,16 @@ void _watch_enable_tcc(void) {
 
     // enable LED PWM pins (the LED driver assumes if the TCC is on, the pins are enabled)
     HAL_GPIO_RED_pmuxen(HAL_GPIO_PMUX_TCC_ALT);
+    HAL_GPIO_RED_drvstr(1);
     HAL_GPIO_RED_out();
 #ifdef WATCH_GREEN_TCC_CHANNEL
     HAL_GPIO_GREEN_pmuxen(HAL_GPIO_PMUX_TCC_ALT);
+    HAL_GPIO_GREEN_drvstr(1);
     HAL_GPIO_GREEN_out();
 #endif
 #ifdef WATCH_BLUE_TCC_CHANNEL
     HAL_GPIO_BLUE_pmuxen(HAL_GPIO_PMUX_TCC_ALT);
+    HAL_GPIO_BLUE_drvstr(1);
     HAL_GPIO_BLUE_out();
 #endif